A door that suddenly feels heavy
A loud pop followed by a heavy door often points to a broken spring or a balance problem. Stop using the opener. The motor is not meant to lift the full door weight by itself.
Garage door stuck open, crooked, or too heavy to lift? We provide garage door repair in Newark, NJ for broken springs, cables, off-track doors, and opener problems. Call (551) 279-6408 for free estimates.
Across our New Jersey service area.
Request a callback
We inspect the door, explain the recommended work and total proposed price, and wait for your approval. No obligation. Additional work is discussed and approved separately.
“Quick. Efficient and would hire them again!!!”Corinne Chestnut · Google review

Browse actual LGD spring repairs, opener work and garage door installations, with each job’s location identified.
See our New Jersey job photos · Meet Roni and our family business
If your Newark garage door is stuck open, hanging crooked, or blocking a vehicle, call us with the door position and how we can reach the garage. Our emergency repair page explains what to do while you check technician availability.
For a Newark visit, let us know whether access is from the street, a driveway, or a shared rear entrance. Mention a blocked vehicle or limited access when booking. Keep the opening clear if the door is crooked or a cable is loose.
We inspect springs, cables, tracks, rollers, and opener operation before recommending parts. You receive a free estimate and an explanation of the repair before approved work starts.
Our work in Newark includes installing a Chamberlain garage door opener. If you need a replacement, tell us the current model, whether the motor still runs, and where the door stops. See what we check during garage door opener installation.
Our off-track door photos from Lodi show the kind of roller, cable, and track problems that can leave a door at an angle. The photos are from Lodi; we also provide off-track repair in Newark.
For opener trouble, see the door and opener setup photographed in Scotch Plains. Door balance matters before an opener can be tested safely.
The symptom matters more than guessing which part failed. These are useful starting points for a service call.
A loud pop followed by a heavy door often points to a broken spring or a balance problem. Stop using the opener. The motor is not meant to lift the full door weight by itself.
Both spring systems store dangerous energy. We identify the setup, check door weight and balance, and match the repair to the door instead of guessing from appearance alone.
Loose cables, damaged rollers, or a track problem can leave one side lower than the other. Do not pull the door or keep cycling the opener because the panels can twist.
Door size, wind exposure, insulation, panel design, glass, hardware, opener compatibility, and the condition of the opening all affect the right installation choice.
Weather seal trouble can involve the bottom seal, side and top trim, an uneven floor, or a door that no longer closes squarely. The door position should be corrected before new seal is fitted.
A heavy door can point to a spring or cable problem. Stop using the opener and do not test the door by lifting it if a spring, cable, drum, or bottom bracket looks damaged.
If the door is crooked or a cable is loose, stop at the wall control. Repeated opener cycles can pull the door farther out of position and damage the top section.
Use the emergency release only when the door is fully closed and stable. Releasing an opener from a raised door with a spring problem can allow the door to fall.
Call if the door is jammed, hanging unevenly, off track, or too heavy to move normally. We also handle emergency garage door repair when the situation cannot wait for a routine appointment.
Age alone does not decide the job. Condition, parts availability, safety, repeated breakdowns, energy goals, and the cost of the needed repair are more useful factors.
An opener problem does not automatically mean a new opener. Sensors, remotes, controls, travel settings, and some drive parts can be repaired. Replacement may be practical when major parts are obsolete or the unit lacks current safety features.
Review garage door installation options or call for a free estimate based on the actual door.
Repairing hardware is different from changing a door opening, structure, or electrical setup. Permit and inspection needs depend on the work. New Jersey's Department of Community Affairs explains that local construction offices administer Uniform Construction Code permits.
Check New Jersey DCA local code guidance, then confirm current requirements with the construction office that serves Newark.
Yes. We check door balance, power, controls, remotes, sensors, travel settings, the drive system, and the motor before recommending a repair or replacement.
That depends on the failed part, the opener's age and condition, parts availability, safety features, and whether the door itself is balanced.
Yes. We repair torsion and extension spring systems. Do not lift a heavy door or touch a spring, cable, drum, or bottom bracket.
You do not need to diagnose the door before calling. Describe what it does when the wall button is pressed, what sound you hear, and where the door stops.
Request a free in-person estimate from our family-owned company. We inspect the door, explain the proposed work and provide the repair price for your approval before work starts. Ask for a written estimate and review our warranty terms.
Tell us your town and what the door is doing. Our team will follow up about the next step.
Enter your street, town, and ZIP. We’ll call to discuss the next step.
Need help? Call (551) 279-6408 or email us.